General Outline
  History
  Department
Distributors
   
 
  Optical Lens Parts
  Special Glass Works
   
   
   
 
  Zoom Microscope Set
  Zoom Lens Series
  Camera Series
  Camera Stand Series
  C-Mount Series
  Micrometer Loupe
   
     
     
     
   
   
 
   
   
   
   
   
   
 
Optical Kit for Hardware
We have useful kits that holds highly used optical lenses, lens holders, and C-mount bench. Please see details.
P/N Description Image Spec
TS-30 Optical Lens Parts Kit Details
TS-31 Optical Lens Holder Kit Details
TS-32 C-Mount Bench Details
Helicoid Barrel
TS-0112H Helicoid Barrel The helicoid barrel allows you to adjust focus with helicoid system. This barrel can hold Dia.19 lenses or sensor lenses and allows to move back and force lenses without rotating the lens.

P/N Description Outer Dia. Length
(mm)
Inner dia.
immj
Weight
(g)
TS-0112H Helicoid Barrel 30(31.0) 27.0(32.0) 19 23.6
*The figure shown in (@) is the length including laurette and male thread.
Adjustable Iris Diaphragm
TS-0111H Adjustable Iris Diaphragm Barrel Adjustable Iris Diaphragm can be adjust the iris with clicking eight locations. This holder can be attached to any C-mount holders. This can also attach to the hellicoid barrel holding sensor lens. (In that case, please connect F50mm to the rear side and other lenses to the front side.)

P/N Description Outer Dia. Length
(mm)
Inner Dia.
immj
Weight(g)
TS-0111H Adjustable Iris Diaphragm 30 12.0 (16.0) 0`10 13
Rotating Prism Barrel
TS-0121H Rotating Prism Barrel
Rotating prism barrel can rotate the image 360with the prism holding inside of the barrel by loosen the screw at rear side. By tighten the screw, it can be fixed. This product is best for those users require to capture the image at exact angle.

P/N Description Outer Dia. Length
(mm)
Inner Dia.
immj
Weight
(g)
TS-0121H Rotating Prism Barrel 30.2 52.4 (56.4) 11 78
C-mount Rotating Barrel
TS-0132H C-mount Rotating Barrel C-mount Rotating Barrel can hold polarizing filter and scale. At the same time to attach the barrel to other parts, it is able to rotate the filter or scale inside of the barrel
P/N Description Outer Dia. Length
(mm)
Inner Dia.
immj
Weight(g)
TS-0132H C-mount Rotating Barrel 30 16.5 (20.5) 18 18
Double Male Thread Ring
TS-0115H Double Male Thread Ring Double Male Ring can connect in betwee the C-mount barrels with female threads.

P/N Description Outer Dia.
(mm)
Length
(mm)
Inner Dia.
(mm)
Weight
(g)
TS-0115H Double Male Thread Ring 30 4 (12.0) 22.0 5
*The figure shown in (@) is the length including male thread.
Double Female Thread Ring
TS-0138H Double Female Thread Ring Double Female Thread can connect in between the C-mount barrels with male threads.

P/N Description Outer Dia.
(mm)
Length
(mm)
Inner Dia.
(mm)
Weight
(g)
TS-0138H Double Female Thread Ring 30 12.0 25.4 5.8
Hood
TS-0108H Hood Hood is connected to C-mount barrel female thread in order to prevent incoming scattering light when incident/emitting the light under free light area. there is light shielding line inside of the barrel to avoid diffused reflection.

P/N Description Outer Dia.
(mm)
Length
(mm)
Inner Dia.
(mm)
Weight
(g)
TS-0108H Hood 30 15 (19.0) 27.5 6
*The figure shown in (@) is the length including male thread.
Focal Length Adjustment Barrel
TS-0114H Focal Length Adjustment Barrel Focal Length Adjustment Barrel can adjust the focal length and imaging point by changing the length of the barrel. The barrel can be fixed with screw.



P/N Description Outer Dia.
(mm)
Length
(mm)
Inner Dia.
(mm)
Weight
(g)
TS-0114H Focal Length Adjustment Barrel 29 (30) - 18.0 44
Spacer Ring
Spacer Ring Spacer Rings are used in order to creating light path area. Three types of thickness are available.

P/N Description
TS-0116H Spacer Ring 0.5mm
TS-0117H Spacer Ring 1.0mm
TS-0118H Spacer Ring 2.0mm
Extension Barrel
Extension Barrel Extension Barrels are used to increase the magnification by extending the focal length. The Working Distance will be shorten. Length variation are 8 types from 5mm to 100mm as below.

P/N Description Outer Dia.(mm) Length
(mm)
Outer Dia.
(mm)
Weight
(g)
TS-0104H Extension Barrel 5mm 29 (30) 5 22.0 3.6
TS-0105H Extension Barrel 10mm 29 (30) 10 22.0 5.8
TS-0106H Extension Barrel 15mm 29 (30) 15 22.0 11.6
TS-0155H Extension Barrel 20mm 29 (30) 20 22.0 13.6
TS-0156H Extension Barrel 30mm 29 (30) 30 22.0 21.0
TS-0157H Extension Barrel 40mm 29 (30) 40 22.0 28.6
TS-0107H Extension Barrel 50mm 29 (30) 50 22.0 36.0
TS-0133H Extension Barrel 100mm 29 (30) 100 22.0 73.6
*The figure shown in (@) is the length including laurette and male thread.
Lens Holder
Lens Holder Lens Holder can hold lens and filter. Place the lens inside and fix with screw-ring. Five types of inner diameters as 3, 5, 10, 15, and 20 are available. This can hold lens with thickness from 1.5mm to 3.5mm.

P/N Description Lens Size to hold
(mm)
Effective Inner Dia.
(mm)
Weight
(g)
TS-0100H Lens Holder@3 3 2.5 9.4
TS-0101H Lens Holder@5 5 4.5 9.2
TS-0102H Lens Holder@10 10 9.0 8.4
TS-0131H Lens Holder@15 15 13.5 7.4
TS-0103H Lens Holder@20 20 19.0 4.8
Lens Holder for Thicker Lens
Lens Holder for Thicker Lenses Lens Holder for Thicker Lens can hold thicker lenses and filters. Placing the lens inside and fixed with screw-ring. Three types of inner diameters as 10, 15, and 20 are available. This can hold lens with thickness from 5.0mm to 10.0mm.

P/N Description Lens Size to hold
(mm)
Effective Inner Dia.
(mm)
Weight
(g)
TS-0130H Lens Holder@10 10 9.0 20.2
TS-0129H Lens Holder@15 15 13.5 16.6
TS-0128H Lens Holder@20 20 18.5 21.2
Direction Change Barrel
Direction Change Barrel Direction Change Barrel can change the direction of holders and barrels without moving the camera. Attaching this barrel in between the camera and holders and it can be fixed with three screws.
P/N Description Outside Dia.
(mm)
Length
(mm)
Inner Dia.
(mm)
Weight
(g)
TS-0143H Direction Change Barrel 30 4.0 (16.0) 21.5 7.8
*The figure shown in (@) is the length including male thread
Incident / Emitting Barrel
Incident / Emitting Barrel Incident / Emitting Barrel holds incident & emitting elements in order to sustaining the light axis of C-mount. Using three screws to adjust the depth of variablity of center area of incident & emitting elements. Two types of elements sizes are available as 5 and 7.

P/N Description Outside Dia.
(mm)
Length
(mm)
Lens Size to hold
(mm)
Weight
(g)
TS-0110H7 Incident / Emitting Barrel 7 29
i30j
15.0 (19.0) 7 18.6
TS-0110H5 Incident / Emitting Barrel@5 5
*The figure shown in (@) is the length including laurette and male thread.
Objective Lens & Eyepiece Lens Barrels iC Mount)
Objective Lens & Eyepiece Lens Barrel Both Objective Lens Barrel and Eyepiece Lens Barrel hold objective lens and eyepiece lens (JIS spec mount) in order to attach C-mount.

P/N Description Outer Dia.
(mm)
Length
(mm)
Inner Dia.
(mm)
Weight
(g)
TS-0109H Objective Lens Barrel 30 6 M20.32 6.8
TS-0122H Eyepiece Lens Barrel - - - -

Objective Lens Revolver Holder (C-Mount)
Objective Lens Revolver Holder In order to attach different magnification of objective lens (JIS spec mount size), we have revolver shape Objective Lens holders. Both holders can hold objective lens 3 or 4 and lenses can be changable using revolver.

As this holder is C-mount, it is possible to attach other C-mount holders.

P/N Description Number of Objective lens to hold Screw Dia of Revolver
(mm)
TS-0189H 3 holes revolver 3 pcs M20.32
TS-0190H 4 holes revolver 4 pcs M20.32
Inverted Barrel
Inverted Barrel Inverted Barrel holds prism inside to invert the image.

P/N Description Outside Dia.
(mm)
Length
(mm)
Opening Size
(mm)
Weight
(g)
TS-0120H Inverted Barrel 29i30j 34 (38) 11 32
*The figure shown in (@) is the length including laurette and male thread.
Prism Box
Prism Box Prism box holds 22mm square size beam splitter inside. Light path of 3 directions or 4 directions iattach the Prism Box cover TS-0142H <Optional>jare secured. Prism box can transmit and reflect the incident light. By attaching C-mount size holder, it can prevent dispersed light.
P/N Description Dimension
(mm)
Hole Dia.
(mm)*ӏ
Weight
(g)
TS-0113H Prism Box 35 x 35 x 35 M25.4 x 3ӏ 77
Prism Box Cover
Cover for Prism Box By replacing with the plate of Prism BoxiTS-0113H), this can secure the light path of four directions. C mount size holders can be attached.
P/N Description Dimension
(mm)
Hole Dia.
(mm)
Weight
(g)
TS-0142H Prism Box Cover 31.8 x 31.8 x 5 M25.4 6.6
Mirror & Half Mirror Box and C mount Cover
Mirror & Half Mirror Box By assembling the mirror frame or half mirror frame inside of the box, this can reflect or transmit (Half mirror only) the light paths or image. This can also prevent the dispersed light by connecting the holders. C mount size cover is also available.
P/N Description Dimension
(mm)
Spec Weight
(g)
TS-0134H Half Mirror frame 22 x 22 x 22 Half mirror included -
TS-0135H Mirror frame 22 x 22 x 22 Mirror included -
TS-0123H C mount cover 28 x 1 (4) C mount male thread -
*The figure shown in (@) is the length including male thread
COPYRIGHT(C) SUGITOH Co., LTD. ALL RIGHTS RESERVED.